...scanner head starts to move at all when you power up the unit. If the head does not move at all or makes an unusual noise, chances are the unit is complaining that the head is stuck or requires too ...
Question about Office Equipment & Supplies
...stuck there. lift up the scanner unit and switch on the printer, does the sound come from the print head side, it could be due to the print head getting stuck... the encoder belt might be
...scanner and see if the home position sensor, which would be a U shaped sensor has popped out. The clicking is from the scan head trying to find the home ( start) position sensor and not finding it. ...
scanner head failure. Unplug unit from computer to see if it will do it with no cominication to PC. i had the exact same problem. this fixed mine. http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&
...scanner head is unable to find home position. You will have to clean the strip under the glass. If this only start to happen recently, you could unplug the printer and wait 1 hour. Replug in the ...
...scanner rail (silver round bar running width if printer that head with ribbon runs on) can get dry making head stop, lube with light machine oil. Canalso be from a faulty ribbon, the ribbon is driven ...
Question about Epson Photo Office Equipment & Supplies
...scanner cover by pulling up on the lower right corner of the cover until it locks into place. 5. Remove the jammed paper. If the paper is jammed underneath the print head, unplug the machine from the ...
...scanner unit and remove the paper." This occurs because the right side of the paper starts to get fed and the left side remains out. There is no paper that really gets stuck. Hello there You may not ...
...scanner from somebody and realised there were no plugs for it so now im stuck with this and no way to work it? would i be abel to buy the power cords it needs in the store? dose it requier a cd or ...
...head. Any suggestions? I dont think the paper is beneath the ph. Some paper will stuck between the gear wheels. Pull papertray out and try to look from the bottom into the printer. Another way is to ...
163 questions posted
Usually answered in minutes!
106 Questions
61 Questions
35 Questions
3 Questions