...when I print a 4X6 size. I just inserted a new print cartridge and purchased a new pack of paper - and it still leaves the stripes. any ideas? try aligning and cleaning the cartridges hope this ...
print and leaves a blank stripe I have a hL5040 that leaves a blank stripe about 1/3 the way in frim the left margin (about 3 in from paper edge). Have changed the toner unit, no better. Also print in
zebra stripe wont print properly turned it on one day to print labels but it would only print the right and left of center leaving a half inch unprinted area down the center. print head indicator ...
Question about Epson Office Equipment & Supplies
...leaves wide black stripes for the whole length of the paper. Printing From a file is OK. In the scanner operation the scanned copy document comes out with large black stripes for the whole length of ...
Question about Epson Office Equipment & Supplies
Heavy black stripe on back side of every printed page The printer is leaving a wide (1cm) black stripe of ink on the back side of the paper with every page that is printed. This started after ...
Printing problems Laser printer is leaving unprinted stripe down side of page? According to the manual, "If there are white vertical lines on your printout, you will need to clean the print head." I ...
Question about Zebra Office Equipment & Supplies
I have installed (hardware + driver) a stripe s600 via COM1 on my desktop; how can i get a test page? i does not work from the test page @ printer properties. You should be able to print a test page ...
...leaves white stripes of uneven printing. How do I clean/fix this? Thanks Remove the ink cartridge and swab the accummulated dried ink from the intake hole with a bit of isopropyl (alcohol) from the ...
...leaves black lines Pages print with thin black lines throughout. I have replaced the maintenance kit, emptied the waste tray, run the clear stripes procedure dozens of times, and cleaned dozens of ...
printing stripes Hero 7.1 is printing light and dark stripes across the page You may have dried ink in the printhead. You can remove the printhead and try cleaning it at home in hot soapy water, rinse
274 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
454 Questions