Dell Photo 964 All-In-One InkJet Printer "print smudge" Questions

...print mode only, not for grayscale When printing in color mode I get a vertical line of black ink smudge on the left margin of the page. I checked about cleaning toner spills inside the printer, ...

smudge over the entire page. It is not the print job itself that smudges because images and text are crisp underneath the smudge. The smudge has several dark horizontal bands across the page. Do I buy

smudge line on side of page When I print, there is a solid smude on left side edge of paper, next printing it is on the right side. Smudges are most likely from the toner cartridge. If you can take ...

...print using manual feed. Once the last bit of paper goes into the machine, open the printer door. Remove the toner to check if smudge is there. Replace toner cartridge if there is smudge, replace ...

...smudge very badly Try reducing the print resolution using the menu buttons. Does it smudge with coloured prints? If so then the fuser unit is faulty. If it is only black that smudges it is likely to ...

...print again it leaves smudge marks again. What is causing this? I also had this issue, waste tone was comming from the transfer belt, had a good clean out been good for months now. open priter case ...

Printing black smudges across the page at 10 cm intervals The printer prints smudges, ca 5 cm apart horizontally and 10cm vertically. Varies, when I clean everything, the green roller, gently, and ...

...Print was lite but readable. It had a one inch background smudge band running down page, text in that area was darker.After cleaning and printing about 30+ pages, issue finally went away. Finally got ...

smudge clear down the page. I clean the roller but continues to print bad copies. Should I replace the cartridge? Problem is either the cartridge or the fuser. Put paper in the manual feed tray(tray 1

smudged horizontal lines Black smudged horizontal lines during printing Try cleaning your rollers, it worked for me. I hope this helps. The top 1/2" of the thick vertical bars in the nozzle test ...