Dell 924 All-in-One InkJet Printer "paper roller" Questions

...paper feed roller is dirty, paper is not fed properly because the paper feed roller slips. Cleaning the paper feed roller could resolve the paper feeding problem. Please follow the instructions below ...

...paper feed roller, so if you find the pad, you've found the roller. Clean it and your jams should stop. Three Roller Paper Separation System- Pull your paper tray out, and look for a roller on ...

Paper Feed Roller (Roller Cleaning)Clean the paper feed roller if paper is not fed properly. Cleaning the paper feed roller will wear the roller, so perform this only when necessary. 1. Make sure that

...paper sensor around roller, the roller out of runing if the sensor is not senitive enough or sensor switch dirty, clean the sensor as you can find it, 2) Lighter-weight paper feeds and prints fine, ...

...paper feed roller, so if you find the pad, you've found the roller. Clean it and your jams should stop. Three Roller Paper Separation System- Pull your paper tray out, and look for a roller on ...

...paper feed roller, so if you find the pad, you've found the roller. Clean it and your jams should stop. Three Roller Paper Separation System- Pull your paper tray out, and look for a roller on either ...

...the rollers as they turn and remove the paper towel as the paper ejects. Repeat as necessary. Now is a good time to also clean the paper pick up roller and feed rollers to prevent feeding

...paper feed roller, so if you find the pad, you've found the roller. Clean it and your jams should stop. Three Roller Paper Separation System- Pull your paper tray out, and look for a roller on ...

...paper pick roller farther inside the rear access area. The paper pick roller IMPORTANT : The paper pick roller is a bit more difficult to reach; however, it is the most important part to clean. Make ...

...paper feed roller cleaning, and select 'Properties' from the displayed list.Click the 'Maintenance' tab and click 'Roller Cleaning'. Remove all sheets of paper from the rear tray, then click 'OK'. ...