Honeywell Programmable Thermostat Heater "factory reset" Questions

...reset this model after putting new batteries Gloria, some where on the front of the thermostat there may be a tiny hole about the size of a toothpick. If so, usually under that hole is a microswitch ...

Honeywell 3600. AC cools to 5+ degrees cooler than setting. I have to do factory reset every other day or more. i would change thermostat

hold only shows up after the hold button has been pressed 2-3 times. If this does not fix the issue, there is a master reset button on the thermostat that will set all settings back to factory default

...reset back to factory defaults. you can go from there. if nothing else, unhook the stat, pull the batterys and let it sit a while. it should forget everything. if you tell us the stat model we might ...

...18 we set it at briefly appears in the display, but is replaced by 22 immediately. Ideas? most programeres have a factory preset time, you will have to find them and reset them to your own ...

RESET PROGRAM'. Press the or buttons to select the preferred setting (0=user program, 1=factory program) and the display will flash, indicating a change has been made. To confirm this change press the

...FACTORY DEFAULT PROGRAM.IT COULD BE RUNNING IN THAT MODE.FIRST,CHANGE THE BATTERIES IN THE STAT.ALSO,THEY HAVE A RESET BUTTON ON THE CIRCUIT BOARD.TRY THAT.AND,BY THE WAY,YOU ARE NOT SAVING ANY MONEY ...

reset it, and it passes the "test" steps as indicated in the manual). The green light on the receiver goes on when the thermostat shows the flame icon. However, the red light on the receiver

...factory settings My Vision Pro didn't reset any data when I pulled it from the wall and put it back. No batteries to remove as I never installed them since I leave it on the wall. My temp schedules ...

reset to factory default? new router. now i cant change the wifi on the thermostat. It is actually an extensive process to reset or reconnect with a new wifi setup. To try to explain it would probably