The fan won't change to "auto" The fan won't change from "on" to "auto" and runs continuously. i have worked on many honeywells and the button slides from on to auto but you have to push very firmly ...
auto setting not working honeywell 5/2 day stat, cooling auto setting not working, green wire g terminal, blue wire to y terminal, white wire to w terminal, red wire to r terminal with jumper to rc in
Question about Honeywell Heating & Cooling
my honeywell st9400c changing from auto to continuous My ST9400C is set on "Auto" but it keeps changing to "continuous" for no reason I can work out How old are the batteries? You may want to replace ...
switches to on (blower) by itself My thermostat keeps switching itself to ON versus auto where its set, then it blows cool air, when its cold outside like yesterday when I got home from work it was ...
Question about Holmes Heating & Cooling
lo on thermostat does not work on holmes tower quartz heater Holmes Tower Quartz with Maxflo - Heat does not work when thermostat is set on "Lo". Also, Fan does not work on either Hi or Lo Replace the
Question about Honeywell Heating & Cooling
chronotherm 3 programable stat auto doesn't work. Hello dose it have batteries? all the one i work on did! If not there should be 24 volts comeing to the stat. use a Volt meter Check the red wire.
Question about Procom Heating & Cooling
how do I get the pilot light to stay on after it lights? the auto ignition works and lights the pilot, bur, once I let go of the knob, it goes out Thermocouple needs replacing
Question about Honeywell Heating & Cooling
My thermostat wont work auto heat! Fan doesn't go on yes
...auto-on while the system was working properly? And when it shuts down, does the blower in the furnace/air handler shut down as well? And the no batteries just means the thermostat is drawing power ...
Question about Honeywell Heating & Cooling
...we turned the time back for day light savings time, the auto switch is not working right. We have had this thermostat for 8 years. make sure the hold is on so it can hold the temperature you set it ...
2,089 questions posted
Usually answered in minutes!
87 Questions
47 Questions
43 Questions
32 Questions
17 Questions