Honeywell Programmable Thermostat Heater "auto cool working" Questions

Ad

Question about Honeywell Heating & Cooling

1 Answer

auto setting not working, green wire g terminal, blue wire to y terminal, white wire to w terminal, red wire to r terminal with jumper to rc in place. the unit runs cool in fan on mode. i set the pre-

Ad

Question about Honeywell Heating & Cooling

1 Answer

...auto function DON'T. use what you need to either cool or heat your house not both in the same day it doesn't make sense and yes you can run it all year long on auto but its really not worth paying to ...

Ad

Question about Honeywell Heating & Cooling

1 Answer

auto where its set, then it blows cool air, when its cold outside like yesterday when I got home from work it was colder in the house than outside so when I switched it back to auto it took forever to

Question about Honeywell Heating & Cooling

1 Answer

auto. How can I fix this? Hello my name is Heath it will be my pleasure to assist you. The wiring connections seem okay. These thermostats have a 5 minute delay I would put it on heat or cool and then

Question about Honeywell Heating & Cooling

2 Answers

...working if I set it to auto. If the set point temperature is higher than the actual temperature, it will not work, it sounds normal for the cooling. But the temperature would not decrease into my ...

Question about Honeywell Heating & Cooling

1 Answer

...working I installed a Honeywell RTH230B digital thermostat on a new gas furnace. With the mode switch on "heat" and the fan switch on "auto", bumping the temperature up does not cause the furnace to ...

Question about Honeywell Heating & Cooling

1 Answer

...auto" mode kicks on heat when temp drops below set temperature. The problem is that after warming up to that temperature...it does not shut the fan off. Because of that, cool air is then blown ...

...AUTO" position? If that is the case, there will be a problem with the thermostat, wiring to the thermostat, or the unit itself. That would sum up a "thermostat" problem for the fan not working. If ...

Question about Honeywell Heating & Cooling

1 Answer

...cool so its usually set at 68-70). Now no matter what you set it at, it stays at 72-73 on the thermostat. Thought maybe the battery was bad, changed those.. no help. New filter.. tried that, no help. ...

Question about Honeywell Heating & Cooling

1 Answer

auto fan and set the desired temp. It is programmable but only has two wires. �� Connect Wires 5. Labels don't match? If a wire does not match any terminal on the thermostat, see

Not finding what you are looking for?
Heating & Cooling Logo

2,089 questions posted

Ask a Question

Usually answered in minutes!

Top Honeywell Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honeywell Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...