Kenmore 15343 "thread not catching" Questions

...GOES DOWN TO CATCH THE BOBBIN THREAD, IT COMES BACK UP WITH NO THREAD the needle is not catching the thread on the down stroke have you got enough thread out on the bobing for the needle to ...

...can find them at sewing machine dealers. If the thread spool has a rough notch that is catching the thread, smooth it with an emery board or turn the spool so the thread feeds from the opposite

...thread is catching in the bobbin area-not where the area where the bobbin sits, but the steel part that circles under it when you move the hand wheel (I hope that is clear to understand) and it keeps ...

...catching the lower thread, it seems as though the needle isn't able to go low enough to catch the thread. The balance wheel doesn't seem stiff but it doesn't feel as smooth as it used to. the thread ...

catching thread NOTE TO THE QUESTION. Bobbins do not catch thread. A hook underneath when you use the wheel to advance the machine will come and catch the under thread OR BOBBIN THREAD and pull it up.

bobbin thread won't catch with needle thread I have tried several bobbins and rethreaded machine, still the thread in the bobbin ... guided through the little catch and brought to back of machine as ...

...thread is not catching the bobbin thread the needle bent during sewing and since i put the new one in,the main thread is not catching the bobbin thread when the machine is sewing. think it might be ...

...catching thread There isn't a problem with the timing of the needle and shuttle. When the thread is hanging loose (aka when not using fabric) the hook catches the thread just fine, but when ...

Thread not catching I've re threaded the upper thread, but when I try to run it through the carry the bottom thread up, it won't catch. Why won't it catch? It was working a little while ago, then ...

...catching the bobbin thread? If not, then the machine may be out of time. Search for sewing machine timing or take it for service. If it catches the bobbin thread but then the bobbin thread is ...