HP PSC 1350v All-In-One InkJet Printer "copy machine scanning half paper" Questions

...machine only copy a half of the paper I scan the test: http://tufotocopia.com/minolta/di250.jpg Check the exposure lamp light.Open the document feder cover,verify the lamp light(press the cover ...

copy one page and it scanned half way then beeped with E0000 now machine will not allow any copies at all E codes are usually paper jams take out paper drawer and look for jammed paper if you dont see

...copy button blink continuously. And that's all I can get it to do. Can I take it apart and replace something? If it weren't for the fact that it still prints things from my computer I'd toss it out ...

...copy the paper jams after the scan and print of first side. Acts like the bottom half not working. It may be this simple: 1- as silly as it may seem, are you sure the size is correct, if it is a ...

...machine to print a document. The problem is that that there a small piece of glass that the doc feeder use's to scan the orginal. You will have to clean the small glass it's about a half of a inch ...

machine that works. Thank you for your reply but the two available solutions did not work. I can copy and also receive faxes. I can fax one page but am unable to fax multiple copies. The rollers don't

...COPY IN VERTICAL ON RIGHT HAND SIDE WHEN YOU READ THAT PAPER SO WHAT COULD BE THE PROBLEM ON IT WHILE IT IS NEW MACHINE???? AM SCARED!!!. PLEASE IWOULD BE VERY HAPPY IF YOU HELP ME TO SOLVE THIS MY ...

copy, it comes out missing the left side print for about an inch. Basically just a blank stripe going down the side. No one has been able to figure out the problem. Again, it doesnt do it all the time

...copy print or scan Hi! If there is a printer with door problems, this is one! Lets presume you have a paper jam, even if you dont see it. The bit of paper can be stuck in this three points: paper ...

...copy. Instead, it sits at the screen "printing" indefinitely; I have not waited this out, and have turned the machine off. Another thing is when I open the lid, the cartridges do not move to where I ...