HP DeskJet 930c InkJet Printer "paper tray" Questions

...tray. The paper stack should not exceed 10 mm or .38 inches. Use the same type paper in the paper tray when you are printing. Makesure that the paper width adjuster is against the left side of ...

...paper tray is full. Any ideas? Pretty well all printers come with two places to load paper: one paper tray and one feed tray. Is the button on your computer or the setting in your word processor ...

...paper tray not work Contact the dealer and replace the paper tray/// The Paper Sensors (Plastic sensors - lifting type) inside the printer connected to paper tray might not be working properly.. ...

...paper tray (at least ten sheets). * The paper tray is not overly full. * The paper stack is touching the back of the paper tray. 2. Slide the paper guides so they fit firmly against the edges of the ...

...paper tray out and try a vacuum cleaner suck to ensure no paper debris is sticking somewhere, 'Knock up' the paper pile and ensure it is fully inserted in the tray. Turn printer off then on See what ...

...wrinkled, or bent paper. Make sure that all the paper in the stack is the same size and type. Never load mixed types of paper in the tray. The product can only process one type of paper at a

...paper in the tray, pushing the paper into the printer and check the Resume Light is flashing. 07 Place the paper in the In tray, pushing the paper into the printer until you get the flashing. 08. ...

...in the bottom Printers with photo tray have a nominal input tray capacity of 10 mm, or 100 sheets of plain paper. If the tray is loaded above its normal capacity, the printers will not pick up

...paper tray and that the paper tray is inserted fully into the printer. The 8.5 x 11 paper should be about one inch from the forward edge of the tray and the tray should be within about 1.5 inches of ...

Paper tray Even when the paper tray contains paper, it reads: No paper and indication "E' is on. On re-insertion of paper into the tray also the sign "E" remains. ...