Install hp4600 dc controller How to Install hp4600 dc controller. Magenta cartridge is leaking and was told to install both cartridge and new dc controller. have heard clicking noises in the past. ...
55.00.00 DC Controller error When turning on I receive error 55.00.00 DC Controller error. I have tried all the standard troubleshooting procedures with no luck Reseat formatter, DIMMs and EIO cards. ...
57 service 57 (or 57.1) SERVICE Message (Main Motor Failure) The 57 SERVICE indicates that the DC Controller PCA detected a general motor failure. The Main Motor drives all moving components in the ...
...using above mention solutions then you can try this one. Open all covers and then detach the DC controller board that is shown In picture below. it is the back side of DC controller board.
My HP Color LaserJet 3600n keeps flashing a 55.04.00 DC Controller error. Now, I have unplugged it, tried all sorts of outlets and still does the same thing. Im no Techy by any means.. so if you do ...
...motor error Reconnect the connectors J16 for the developing disengaging motor and J1100 for the DC controller PCB. Replace the developing disengaging drive assembly. Replace the DC controller
...Hello ,pls check as describe, Reconnect the connectors J18 for the fuser motor and J1101 on the DC controller PCB. Replace any damaged parts. 2 Replace the fuser drive assembly. 3 Replace the DC ...
so we changed the Fans and that worked for a few weeks. Then the error came back and we changed the DC controller, not knowing that there is a procedure that must be followed to the T., which I had no
...the "check mark" to continue.2. If the message persists, turn the printeroff and then on.3. Reseat DC controller connectors J1010,J1012, and J1021.4. Replace the flat cable.5. Replace the DC ...
511 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions
