Question about HP LaserJet Office Equipment & Supplies
...If the noise is a clicking-popping noise, you probably have bad gears, bad toner or a bad fuser I removed left, rear and right sides. My guru suggested that I buy a can of compressed air and blow ...
Question about HP LaserJet Office Equipment & Supplies
...remove the metal registration guide plate (2 screws) and check underneath it. If the pickup rollers are moderately worn, the paper will stop just short of the registration roller. On the 4L/4P/5P/6P ...
Question about HP LaserJet Office Equipment & Supplies
...registration reminder pops up every time i attempt to print something. I use a X4530 model printer and i have registered several times and unchecked the box that says remind me in one week without ...
...remove The B is saying there is a jam in the right hand side of the machine. You may have fuser stripper fingers popped out of place causing it to jam or you may have a torn off piece of paper stuck ...
Question about Xerox Office Equipment & Supplies
...Remove the toner and drum cartridges. Using a flashlight, look inside the front of the printer. At the rear of the cavity there are two large rubber rollers. On the floor, about an inch to the right ...
...remove most paper jams and install image unit. The fan itself is located under the registration system (Its section that has a sponge like roller located directly at the same hieght as the drum/cart ...
...pop kept coming up saying error in trying to install my printer (I never wanted to install a printer) I did a update install of xp (press f12) then load off disc and re install without losing your ...
remove the rod. As they say in the biz, installation is the reverse of removal. Don't forget to use SIM 24 to clear the drum counter. How about setting your registration and black density? BTW, you do
registration rollers. First, you have to go, ( looking from the front of the machine) to the left side of the machine, You will see a electromech clutch on a shaft with a 2 inch black gear with a belt
registration rollers. First, you have to go, ( looking from the front of the machine) to the left side of the machine, You will see a electromech clutch on a shaft with a 2 inch black gear with a belt
761 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
492 Questions
