...then check the phone jack for corrosion. trace it all the way back to where your phone line connects to your house. if it is still not ringing, call your telco to get them to check thier
Question about HP LaserJet Office Equipment & Supplies
...phone gets a line in use indicator and sounds like dead air. I have reset the defults on the hp3050 but still get a communications error. is there someting else that i need to be doing. thanks scot ...
phone line. call it from you cell.if you hear your phones ringing in the house, plug the fax machine back into the jack. [you should still be on your cell phone] if the line goes dead or stops ringing
Question about HP LaserJet Office Equipment & Supplies
...phone line, my phone line goes dead to all other phones. Never had this happen before. Help make sure the fax machine slot is not short .remove all the parale line connection and just conncet the fax ...
Question about HP Office Equipment & Supplies
...phone line kills my house phones when i plug my fax maching a psc2510 photosmart to the modem filter my house house phones go dead Fax machines are analog devices. It sounds like you have a DSL phone ...
Question about HP Office Equipment & Supplies
the telephone line into the Fax machine the telephone line goes dead Verify that telephone cord from the wall is plugged into fax port labeled LINE. The port labeled PHONE is for a spare telephone set
Question about HP LaserJet Office Equipment & Supplies
...the phone line. make sure the phone wire is plugged into the line jack (not ext) and going straight to the wal, no splitters or extensions. if it still cannot send after this try another wire or ...
...phone line that was plugged into the 1600n is dead. We don't believe it is the phone cord as it has neither been moved nor touched. Any suggestions? This is a question that your IT manager or phone ...
phone line problems. 3 conditions must exist for a fax to receive, the phone line voltage must be high enough, the phone line current must be high enough the the DB gain must be correct. A fax receive
phone line needs to be plugged into the socket that has an 'L' next to it. Check this first. If this is plugged in, check the line to the wall socket to make sure it is plugged in. If all this is good
761 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
492 Questions