HP LaserJet 3055 All-In-One Printer "hot roller hit" Questions

...hot linked it for you so you can download it to resolve your issue with the ADF. Look at pages 44 thru 46. Pay special attention to the rubber pad (separation pad) that is under the 2 roller peice as ...

...a cleaning blade. If it happens after going through the fuser(hot) rollers you have a fuser roller problem. Most likely you have a worn drum cleaning blade which is cheaper the a drum. Good

...hot. You can see the actuator between the two white rollers. Paper jam 2 is mainly cause by the scrappers out of position on the side of the upper heat rollers.You will have to clean it and put it ...

...hot roller on every rotation. 2. These printers have an envelope mode that activates a solenoid in the fuser when printing envelopes to force air out of an envelope. If it makes the noise constantly ...

...document, it keeps getting jammed. The printed copies come out folded. Check the fusing unit (The Hot Part) also check the drum/Image units and also the paper guides in the draw rollers clean that ...

...out and there is no jam. what do you suggest? This jam is refering to back door, jam in fuser (hot bit) Double check no paper is wraped around fuser rollers. These machines have a fuser at rear ...

the thermistors and make sure they are touching the hot roller then use SP810 to reset the code. (clear modes, 1,0,7,hold down the clear stop key, enter COPIER SP mode,then go to SP810 and hit execute

...pj 202 no paper in printer checked everywhere? This jam is refering to back door, jam in fuser (hot bit) Double check no paper is wraped around fuser rollers. These machines have a fuser at rear ...

roller past a brush made of toner (colored plastic particles). The static charge will pull the particles onto the charged area of the drum forming an image you can see, next feed a piece of paper onto

...hot roller above the drum inside the right door on the top. As the copy comes thru the rollers the paper hits a plastic lever that is spring loaded and located in the middle of the fixing unit. The ...