Question about HP LaserJet Office Equipment & Supplies
Networked LJ P2015dn was working beautifully for months; all of a sudden refuses to print because it shows either "no paper" amber light (not true) or "paper jam" amber light (not true). Have been ...
paper to my designjet 430 and during the alignment process the papers seems to get hung up in the left roller and it tears the paper when the print head and cutter starts across it...any help would be
Question about HP LaserJet Office Equipment & Supplies
TEAR (4). The paper moves to the current Top of Form. Keep pressing and holding TEAR. 7 Press and hold SHIFT and release TEAR. If I could be of further assistance, let me know. If this helps or solves
TEAR (4). The paper moves to the current Top of Form. Keep pressing and holding TEAR. 7 Press and hold SHIFT and release TEAR. If I could be of further assistance, let me know. If this helps or solves
alignment problem is that the paper tractors are too loose and paper moves more than it should. It takes careful adjustment of the tractors to hold paper just right when the hammers hit the characters
...paper at the tear off bar. After the tear off is positioned properly, press the START/STOP button twice to save the tear off position.Test the positions with a sample print job. If the alignment is ...
...tear/crumple in the top middle of the paper then gets jammed. The rollers may be worn so it is not getting picked up evenly. Also, be sure that your paper tray in aligned properlyand guides are ...
Question about HP LaserJet Office Equipment & Supplies
...alignment when you took off the paper that got jammed. Check the paper feed assembly, rollers and the stabilizer bar. If you don't know any of these things, I suggest you consult a local ...
...paper is used), you should first set the tear position (see above). Press the Setup key. The printer changes to setup mode. Press the Adjust (2) key. Press the TOF (3) key. The paper is fed to the ...
Paper Jam : feeds through and tears Paper feeds through and tears on rollers. One set of rollers not aligned. Please find me someone who can assist to get this corrected hi gafi- for future refs, ...
957 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
663 Questions
593 Questions
492 Questions