back of the printer. Do NOT push it just down! You *must* move the switch away from you. Hold the switch in this position and close the cover. Carefully pull out your tool from the gap. just make sure
Question about HP DeskJet Office Equipment & Supplies
the hole to the back of the printer. Do NOT push it just down! You *must* move the switch away from you. Hold the switch in this position and close the cover. Carefully pull out your tool from the gap
the hole to the back of the printer. Do NOT push it just down! You *must* move the switch away from you. Hold the switch in this position and close the cover. Carefully pull out your tool from the gap
...back of the printer. Open the top cover, reinstall the print cartridges, and then close the top cover Solution Open the top cover. Unplug the power cord from the back of the printer. Unplug the power ...
...cover. > Connect back the power cord. > Turn the printer on using the power button. If it doesn't not resolve the issue, reset the printer. 1. Turn the printer on. 2. Unplug the power cord at ...
is gap adges of covers, inser tool/flat screw driver for opening the covers of left,right & top/back(both combined)you can observe right back side small power supply container
...back side small power supply container, detach power out socket, take out, only one screw fitted at the center point of the power supply & its covered by specification stikker, find the screw, ...
Question about HP DeskJet Office Equipment & Supplies
part it may not working properly. try to move back and forth many time ,then close and check your printer. the problem is there top cover open, printer cannot print. please assist me solve the problem
350 questions posted
Usually answered in minutes!
2,162 Questions
707 Questions
530 Questions
316 Questions
318 Questions
