transfer belt on our printer please the definitive guide to several maintenance tasks on the 2600 step-by-step, with photos! thanks for the link scoob2070! e see http://www.partshere.com/Models/Q6455A
...dirty -- dark dot smears on the pages and black streaks after printing out a couple of pages. When a cleaning page is printed out, it comes out clean. What is up? Hi, If the toner cartridges are ...
...transfer belt has 1. bearings got dirty needs cleaned or 2. slipped out 3. not contacting the charge springs .... i would suggest looking at the transfer belt itself also clean any metal ...
Question about HP LaserJet Office Equipment & Supplies
the page, replaced toner and it is still an issue. dirty scanner.open the printer back cover.remove the scanner assembly clean it ,do the color calibration.u should be fine. Amuna1 check transfer belt
Question about HP LaserJet Office Equipment & Supplies
...dirty' all over the areas which should be white. we have recalibrated - nothing! Any suggestions. Colour prints of photos are also heavily colour cast in blue where skin tones should be. All toners ...
...dirty. hope that explains things. this printer has only HP cartridges. I have another 3800 that has these same issues, but it has some HP & some "refilled" non HP cartridges. thanks You ...
Question about HP LaserJet Office Equipment & Supplies
...transfer belt could be dirty or defective. The printer may simply need cleaning. Given that you posted this question during the winter, it's also very likely a low-humidity environment is causing a ...
transfer roller if necessary. The high-voltage connectors are mounted on the high-voltage power supply (HVPS) PCA and protrude into the toner cartridge cavity. ? Check the springs for functionality.
Question about HP LaserJet Office Equipment & Supplies
...dirty looking background. I ran every possible test and cleaning commands possible. I checked your site for possible help tips, and carefully cleaned the transfer belt with soft tissue and lint free ...
...dirty or if the internal parts of the printer remove the excess, if there is dirt in the transfer belt clean.then close the front cover and turn on the printer without cartridges. then open the lid, ...
54 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions