HP LaserJet 3600n Printer "side panel removal" Questions

...panel and pry forward till it clears the tap. Do the same for the bottom front. The side can then be pulled away and pulled towards the back where the other two tabs are. When replacing, just reverse ...

...off but does anyone know how? You may have to remove the right and left covers, but there is one screw on the left side of the panel and 2 screws on the right side and the panel should just lift

...side panel to reconnect port on hp laserjet p2015dn My usb plug in port was "pulled out" from the printer. How do I open side/back panel to reconnect it? Pull the exit door ALL THE WAY DOWN. Remove 2 ...

...side panel I cannot see how to remove the LH side panel to refix the switch which is operated by the printer cover. It is a bolt cowered by a white label behind, then put a bit flat screwdriver from ...

...panel. It will tilt out from the bottom first, the top of the back has a tab that locks into the top of the printer. Remove the white cover on the left side of the printer that has the cutout for the ...

...panel of printer & then back plate remove all the conections dont fear with the wires all the connectors have there own socket no one will be fitted to other after removing the connectors remove ...

How do I get to the Fuser Film on this printer so I can replace it This is a complex job. Side panels are clipped on only & need to be removed first. Then remove front cover ( is clipped at top ).

...side panel hp 3600 To remove the side cover: Open the fuser cover and remove the fuser. There are four screws that hold the top cover on, remove those and lift the top off, watching for the connector ...

...panel assembly a) Open the front door and the right door. b) Remove two screws (callout 1). c) Release 3 tabs (callout 1) on the right side of the assembly. d) While holding the assembly up, pull the ...