Question about HP LaserJet Office Equipment & Supplies
...error 13, and had to remove a sheet from the rear of the printer. Now when i hit the online button, there is a grinding sound, teh printer will not pick up a piece of paper, it seems to cycle twoce ...
error 13-jam paper HP Laser 4+ paper from m tray feeds okay, takes good print past fuser but stop short of coming out at the back. It is not crumpled or accordion like effect. It seems the two rollers
Question about HP LaserJet Office Equipment & Supplies
...error message 13 it get half way through the print and stops with a paper jam.the page is printed on but not sealed. ink rubs off. Bad fuser you have to replace the fuser in this unit in order for it ...
Question about HP LaserJet Office Equipment & Supplies
...Error 13 Paper Jam Paper jams can occur in 3 places: Entry, registration and exit. If the paper isn't picking up out of the paper tray, visually inspect the pickup roller. If it looks shiny, replace ...
Error 13.20.00 on HP LaserJet P3015 My printer displays the error 13:20:00, which was jammed in the fuser, but there is no paper jam and apparently the fuser sensor also has no problem. It is most ...
...13 For some reason my printer keeps saying it has a paper jam. It prints fine but apparently the back rollers of the printer do not turn on causing the paper not to come out. What can be causing the ...
error 13.06.00 and also 13.20.00. What shall i do? I tired to clean the falg sensor and replaced the end sensor, but still there is no progress. Please i need help ASAP. 13.xxx is paper jam error does
Question about HP LaserJet Office Equipment & Supplies
13.14 For Laserjet 5si. This error is caused by a defective paper control PCA Replace paper control PCA. 13.20 Paper Jam Check Rear Door Media stopped in the paper path during power on or when the top
...13 Paper Jam error that will not go away. I have cleaned and sprayed etc, turned it off - nothing else works. Any ideas? Install a maintenance kit. Get all the feed rollers, transfer roller and fuser ...
...error code 13.XX on the display and the XX is a number that will indicate where in the paper path this error most probably occurred. Just follow the steps for your error on the below chart. This link ...
392 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions