Question about HP LaserJet Office Equipment & Supplies
...with the HP LaserJet 4050 Printer 82.0180 EIO 2 ERROR The 82.XX error represents that the External Card which is located in the formatter of the machine, either is bad or the port in the formatter
Card Stock Jam I have a card stock jam. The suggestions in the manual do not allow me to view the card stock. In other words I can not view the card stock after following the manual suggestions. I ...
HP laser Jet 2840 This machine is supposed to read xD picture cards. When I put a FujiFilm M 1gb xD-picture card in the reader, I get an error message "unknown memory card" error. I know the card is ...
Question about HP LaserJet Office Equipment & Supplies
the jet direct card is not showing up on the configuration page Two possible problems: 1. Bad formatter, not liklely if you have used this printer with this jet direct card for a while and have not ...
Question about HP LaserJet Office Equipment & Supplies
...the printer. the 8150 has 2 EIO slots (EIO 0 or EIO 1). One of the slots is probably the JetDirect card (network card) for the printer. The second slot might be a hard drive but is usually open. If ...
Question about HP LaserJet Office Equipment & Supplies
Problem with printing business cards with HP Lasterjet 1320 I used Avery business cards for lasterjets and I found that when I tried printing them they got stuck in my HP Lasterjet 1320. I tried ...
...,it comes up with **************** on it's display.Please help This could be a Jetdirect network card fault. Remove the card and power the printer on. If it powers up and goes ready then power it ...
Question about HP LaserJet Office Equipment & Supplies
message "card slot not initialized message "card slot not initialized". Turned printer on and off. Still get same msg. The HP Color LaserJet 4650 printer also has three flash memory card ...
hp 5550n show "card slot hp 5550n show "card slot not initializing" I'll assume it's a media card slot-if so try putting a small amount of either denatured rubbing alcohol or hand sanitizer ...
How can I access to the card First,shut down your computer then Pull the old card completely out of the LaserJet 9000. Remove the new card from its packaging and slide it into the printer.Push the ...
392 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions