HP Photosmart 475 InkJet Printer "power supply" Questions

...power supply (power module and cord) from the power source (wall socket) and the printer. Test the power source, wall socket with or without your power bar or surge protector in place, with a small ...

...power supply refers to both the power module and the power cord. Carefully inspect the power supply for visible damage. If the power cord or power module shows any damage, contact HP to replace the ...

Power supply has a little light that is on when you plug it into ac power. when i plug it in the back of printer the light goes out immediately and there is no power to the printer. I have (2) working

...power supply refers to both the power module and the power cord. Carefully inspect the power supply for visible damage. If the power cord or power module shows any damage, contact HP to replace the ...

...power supply was compatible with the old one was working on the problem. There was nothing wrong with power supply or motherboard. I disconnected everything and left only power supply connected to ...

...power supply is pluged in and we have 32 volts going to the unit. Have an HP C6180 that would not turn on, no power. Unplugged and replugged the unit in the back - no fix. Unplugged the unit at the ...

...power supply/cable for HP7260 The printer was loaned out ot a charity and returned w/o a power supply cable. A quick search of the internet revealed no source and HP has discontinues this model. The ...

Photosmart C6180 quit working when the power went out. Has a power button with 83C00020 on screen check the power supply you may have had a surge and need a new power plug/supply...thank your power co

...power supply be dead? The power supply could certainly go bad. Have you had any power surges or outages recently? Do you use a surge protector? Is there any other device plugged into the same circuit ...

...power supply from the wall outlet. 2. Unplug the power supply from the back of the printer. 3. Wait at least 20 seconds, then plug in the supply back into the wall outlet. 4. Plug in the power supply ...