Question about HP OfficeJet Office Equipment & Supplies
...paper feed problem then you dont need to disassemble the printer. observe the area where you feed the paper in and you will see two rollers pressing don on th paper when loaded. theas two are spring ...
...and place one at a time. It's very inconvenient. could be improper bond weight or thickness of paper, too much paper in the tray, or the wheels on the feed rail inside is broken or needs to be ...
Question about HP OfficeJet Office Equipment & Supplies
...thick photo paper like kodak in the printer it jams and leaves skid marks on the reverse side of the paper. I can not get a picture to print on this paper. Used to be fine, what is wrong you need to ...
...used starting "this week" (when you first posted your question). If you did, the photo paper size/thickness may not be compatible with your printer. Otherwise, there may be a problem with the paper ...
...paper tray (less than 1/8" thick stack). Position the envelope so it is only about 1/2" from the end of the paper in the tray so the feed rollers have to transport it into the machine. I also have to ...
...feed paper tray. Step 5Place your paper in the tray. For 8.5 by 11 inch (standard) paper make sure the 8.5 inch side will be fed into the printer. Step 6Set the paper guide. This is the movable piece ...
...paper thickness on your printer. On the back you will see a flip switch change this setting then feed your business card sheet in there and see the diffrence. Plus make sure your settings for your ...
feed paper. Hi, If you can see the rubber rollers that move the paper, you might try cleaning them with alcohol and a lint free cloth or swab. But as was mentioned, a good inspection is the best thing
Question about HP OfficeJet Office Equipment & Supplies
...thick piece of photo paper or similar and press the OK button a few times so it feeds the page through the machine. If that doesn't help it could be a sensor problem, or there might be a foreign ...
...paper from the input tray first, which defeats the object. I have checked my user guide and troubleshooting, but can't seem to find a solution. Am I being thick?! Can anyone advise? Thank you. this ...
3,272 questions posted
Usually answered in minutes!
1,584 Questions
1,223 Questions
991 Questions
857 Questions
782 Questions