HP Officejet 5610 All-In-One InkJet Printer "sheet cart" Questions

...sheet. Thank you for your attention. just remove your cartridge in your printer and afterwards put it again.then clean printhead. This may be due to one of the slightly more devious ways they get you ...

...sheet, and then following instruction, place on scanner and scan it in etc, and it fails to callibrate, I have found it is because some of the information on the calibration page is not being printed ...

...end of the paper and wave it like a fan. The other end of the paper stack will fan open between the sheets and helps to prevent them sticking. Your printer owners manual should have a section on ...

...sheet comes out half black Changed my toner in Dec 2015. It was working perfectly until yesterday when the sheets come out half black. I tried to clean the roller which had toner on half of it Sounds ...

alignment sheets spitting out when turning on the computer everytime i turn on my computer it spits out an alignment sheet out of the printer. I have printed them out and scanned them back into the ...

prints blank sheets I've printed less than 50 pages and now when I try to print, I only get blank sheets. Do the print cartridges need cleaned? No, they need to be replaced. Did you remove the plastic

printer leaving smear marks on paper lately the printer is leaving a a few smear marks on paper Are you using genuine Canon ink carts?? The cheaper "pattern" carts often use lower grade inks that ...

...error; but powder in toner cart. Remove toner cart. shake and reinstall and can print 10 to 20 more sheets before J2 error returns. Xerox XD100 All this means is that your toner is getting low and ...

...I have read and tried everyone methods (dc controller, replacing toner, & adjust paper sheet type) of resolving toner leak. The answer to everyone's problem, is to " check & replace ...

...I clean the inside of the maching. In the users manual, it has directions on how to run a cleaning sheet. Do this 5 times. If it does not correct the error, open the machine, remove the cartridges ...