...CALIBRATION, plus the identifiers: JB61-00305A >HIPS< #2-3 When I put the 5610 back together I didn't know where this strip went and left it out. Now the 5610 doesn't work right and I need to know ...
Question about HP OfficeJet Office Equipment & Supplies
...the rear of the unit passes under 2 "actuators" that appear to be identical (mounted vertically, L-shaped). Under heavy usage, the lower end of these actuators is worn away. To remove the actuators ...
...located to the right of the "Configuration Page" heading. Check the print page to see if the "L" shaped bars are overlapping or bleed into each other. Contact HP directly for a repair or ...
...located to the right of the "Configuration Page" heading. Check the print page to see if the "L" shaped bars are overlapping or bleed into each other. Contact HP directly for a repair or ...
Question about HP OfficeJet Office Equipment & Supplies
...located to the right of the "Configuration Page" heading. Check the print page to see if the "L" shaped bars are overlapping or bleed into each other. Contact HP directly for a repair or ...
...located to the right of the "Configuration Page" heading. Check the print page to see if the "L" shaped bars are overlapping or bleed into each other. Contact HP directly for a repair or ...
datamax dmx-i-4208 (ribbon fault) Re-calibrate the printer. If still not working, take out the ribbon assembly by removing 3 screws and check the sensor ( "L" shaped plastic glass). If still not ...
...I correct? # Do the color calibration..chk # Take diagnoses page printout(menu print out).. ckh 'L' shaped corner images (as shown in fig), if they are not properly aligned, could be ITB ...
Question about HP OfficeJet Office Equipment & Supplies
the carriage belt in good shape (not frayed or teeth missing)? Also there are special paper considerations for the calibration to work...Bright White Inkjet Paper is recommended., not just plain paper
Question about HP OfficeJet Office Equipment & Supplies
...have noticed a problem with the 2D datamartix barcode after printing. It is slightly rectangular in shape. Zebra no longer supports the printer so I'm not sure what the problem is. It may have to be ...
3,272 questions posted
Usually answered in minutes!
1,584 Questions
1,223 Questions
991 Questions
857 Questions
782 Questions