cradle is sticking upward abutted next to the ink cartridge unit thus preventing the, ink cartridge from moving left causing a horrible jam up. The small black piece will not move in any direction and
Question about HP OfficeJet Office Equipment & Supplies
...cradle carries printheads in it which moves left to right in order to print. >>Clean the rollers with the lint free cloth and lttle bit of water. >>Do a pwr drain(take out the powr cord ...
Question about HP OfficeJet Office Equipment & Supplies
...cradle stuck on right side! Hi I am trying to use my printer but I keep getting the message " Carriage Jam". I have checked all slots to make sure there are no paper jams, I've taken out the print ...
Question about HP OfficeJet Office Equipment & Supplies
...cradle moves left. It moves right. Moves left and right again... Same message... Any thoughts? I was having same problem but it was a paper jam all the time and then it started to state Cairrage Jam. ...
...outlet then push gently the cradle to the left then plug the unit turn on if it is stuck on left disconnect the plug from the outlet then push gently the cradle to the right, hope it helps god ...
Question about HP OfficeJet Office Equipment & Supplies
cradle cannot move." I fixed this problem by disconnecting the power cord from the power-strip and connecting it directly into the wall. My printer was not getting enough voltage from the power-strip.
...Cradle cannot move" message and then the (bleep) thing MOVED to the extreme left, out of sight and out of reach to try and reinsert the cartridge. I can just see the extreme right side of the black ...
Question about HP OfficeJet Office Equipment & Supplies
...cradle is stuck.this happened after i ripped a paper jam out try to move the cartrige cradle to left and right for about 10 to 11 times. if the issue still persist you may need to service you ...
Question about HP OfficeJet Office Equipment & Supplies
cradle will move to either the far left or far right side. If it moves to the far left side, the BLACK cartridge is low or empty and should be replaced. If the print cradle stays on the far right side
...moves on. Got a lot of ink off of it. A couple more test prints...and sliding the cartridge......and it is finally running again. I had this same problem. a piece a paper was torn off from a stuck ...
3,272 questions posted
Usually answered in minutes!
1,584 Questions
1,223 Questions
991 Questions
857 Questions
782 Questions