...fax setup-> press ok/Enter->Scroll Down to Error Correction mode(ECM) and highlight -> press ok/Enter->Select turn OFF-> press ok/Enter.At Last Press Cancel to quit the menu. Decrease the Fax ...
...faxes work ok. toner has been changed Hello sir; Try to make a copy, if copy is OK then replace a new phone cord .if copy not OK still blank, that's means high voltage supply board have
Ok> and reduce fax speed to slow> Press Ok. and cancell to come back to the main screen. To disaable ECM mode> Press Setup . Press the Down arrow repeatedly until Advanced Fax Setup displays. Press OK
Question about Canon Office Equipment & Supplies
...fax activity report I canon pixma mp 830 on my fax activity report I ge a 'NG' result . does that mean no go? Yes,it means the fax did not go through,it will show OK on the report if it was ...
Question about HP Office Equipment & Supplies
...fax OK, then disconnects and gives Comm Error 283 or 232. HP insists it is phone line problem - phone company says line quality is fine - and suggested filter didn't help. Worked fine for 2 years, ...
...fax and delete it (menu, scroll to memory item, ok, scroll to print, OK document, scroll to print all pages, ok, menu to go up, scroll to delete, ok to delete, ok to delete, menu to get out). Worse, ...
Question about HP Office Equipment & Supplies
Select fax settings and press ok. 3. Select communication and press ok. 4. Press the down arror and select ECM and press the right arrow and set it to off. 5. Press OK. The problem should be resolved
Question about Dell Office Equipment & Supplies
there is actually a working line & connected up. Check that the line is OK, get your Telco to test it. Check the Modem in your FAX. and that the cord is plugged in correctly Check your phone cable
Question about HP Office Equipment & Supplies
OK . Send another fax to verify that the ECM is enabled or disabled. Check the Phone Cable connected with the printer. Make sure the Cable should be connected to line 1 port at the back of the printer
Fax and press OK. >Please press the Up or Down Arrow key to select Setup Receive and press OK. >Press the Up or Down Arrow key to select Memory Receiveand press OK. >And, press the Up or Down
757 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions