Fujitsu fi-5120C "fuse error scanner" Questions

...error indicates that SCSI fuse is blown. When 5V, 3.3V fuse is blown, the scanner does not turn on and E8 error is displayed. Check the SCSI fuse status. The SCSI fuse is located in the Control PCA ...

...scanner is reporting an E2 error code when it draws a document in. Any ideas? Re-cycling the power clears error but comes back when I scan. thankyou in advance Hi, This error message means ADF front ...

...error message means ADF backside scanning optical alarm (upper optical unit ADF) which indicates ADF (back) lamp intensity check. Please follow the steps provided below: 1. Is the lower glass (white ...

error code denotes ADF front side scanning optical alarm (lower optical unit ADF) which indicates ADF (front) lamp intensity check. Please follow the steps provided below: 1. Is the upper glass (white

Troubles(pressurizing sides) please help me i'm stucked :) You need to change the thermistor on the fuser unit. Replace fuser. Wrong thermistor can create more troubles or fire

error H2-00 check your connection in fusing unit..try to reset in techrep mode using #p * c *..or replce fusing unit..

i have 200 problem for code sc542 what problem with the sc542 code? Fusing temperature warm-up error The fusing temperature does not reach the fusing standby temperature of 45oC (113oF) within 9 ...

...error. The scanner is M4099d not m4097d. Everything is clean. I don't see a fuse on the main board. You did mean the board for the scanne rnot the camera. The Rom board is the big circuit board that ...

fi-6240 error H0 Motor fuse alarm. looks like you need a new main board.

toshiba e studio 230 error c430 check thermal fuse ,thermistor or heater lamp