Epson Perfection V700 PHOTO Flatbed Scanner "power" Questions

...and even that doesn't work. I also tried changing wall outlets, to no success. Help! Check that the power socket switch is on Make sure your scanner's power cord is securely connected to the scanner ...

can't get power to scanner. Can the transformer go bad check the power cord is connected tightly, ,, and power is comming from your power \source,, or else the connecter can be problem.. replaced

3170 WON'T POWER ON you have either a bad power adapter (more common) or a bad mainboard. test the connector with a volt meter and see if you are getting power, if so, bad main board, if not bad ...

...Today when I went to complete some scanning work I ran into trouble. When I went to turn on the power to the scanner I can not get any power. I have checked all cables and everything looks fine. ...

rED LIGHT FLASHING after local power cut in East London There was a power cut for about 5 or 10 minutes, about 5.30 yesterday & since then my Epson 4990 scanner has not worked, the red light ...

Scanner won't turn on Today my scanner will not turn on. I checked the power cords -- all in order. Can these just "die"? yea scanners can die. i would test the power supply to see if the cord got ...

...v100 was working fine until recently when it seems to be unable to start properly. i'd plug in the power and it would power up for a few seconds then the green light goes off. on some days, i'd get ...

scanner epson perfection 1250 model g820a need power cable epson perfection 1250 model g820a i'm a nubie and was given the scanner without manual and only 1 of the two required connections. the one i ...

Epson V100 flatbed scanner power cord I have the opportunity to purchase a refurbished V100 Epson flatbed scanner, but it is missing the power cord and software CD. Where can I go to find a power cord

What specification is it for me to purchase Cannot find original AC adapter and power cord. What specifications should I take to the computer shop to purchase a replacement? Thank you for the ...