Kyocera Color Copier, Km-c2525e "fixing unit" Questions

fixing unit thermistor connector terminals.(Check the connection of connector CN12 on the main PCB and the continuity across the connector terminals.Remedy or replace if necessary.) Broken fixing unit

...fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. E001 0001 Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high ...

...fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. 0001 Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high ...

Fixing Unit By executing the service mode, the alarm code is closed and the total rotation time is cleared. Thus, this mode must be executed when replacing the fixing unit. If the mode is not executed

fixing unit.you have to replace both fixing roller for this problem. Definitely problem related to your fixing unit. You have to replace either/both the pressure and fixing rollers of the fixing units

...fixing unit fixing film "HP" sensor. Odds are that the film has been ripped and slide to one side and can not find "HP" > You will need to replace the fixing film or the upper fixing unit or the ...

...fixing unit...if you can take out the fixing unit...see if the thermo fuse and thermo start inside the fixing unit not broken you must use a multi tester to check that...check also the wirings from ...

...fixing unit side..plz give me a solution.. thanks Small torn paper was left on your fixing unit. You can remove the fixing unit look for that small piece of paper. ;) in the fixing unit sensor liver ...

PAPER JAM HO RAHA HAI E000007-00000 ERROR CODE Open the Fixing unit and change the fixing unit film . Clean the unit properly remove paper tears inside the fixing unit .....