back right of the radio by where the power socket is. Look for D93. its a big black diode. It will most likely be black and burnt. Some times it may not be. Here is the tricky part. You need to locate
back right of the radio by where the power socket is. Look for D10. its a big black diode. It will most likely be black and burnt. Some times it may not be. Here is the tricky part. You need to locate
back right of the radio by where the power socket is. Look for D23. its a big black diode. It will most likely be black and burnt. Some times it may not be. Here is the tricky part. You need to locate
...5. Normal and CH 9, When the switch is in the normal position, everything is normal, but when you flip it up to CH 9 it instantly puts you one channel 9 with out having to turn the dial. CH 9 is the ...
back to the CB. You want to get the most power to go out, or forward, through the antenna as this drives the signal that others receive. To set your SWR; 3.Connect an SWR meter between the antenna and
...note what your reading is. Now leave the swr meter in ref and turn the cb to channel 1. Key up and take your reading. If the reading on ch 1 is higher than ch 40 you must raise the stinger on your ...
5 different mics, all work in my other radios. I heard something chatter and it would not tx or rx anymore. I wont plug that mic in anything else, must go to another type raidio. thanks, Coy. Check to
...a side note, I've noticed that the frequency's final digit drops to a 2 when I transmit on any mode, and comes back up to 5 when receiving. Check C-144, c-149, c-153, c-154 using an ESR
48 questions posted
Usually answered in minutes!
138 Questions
99 Questions
60 Questions
57 Questions
57 Questions