Monitor control buttons not working. The + and - buttons on the front of my 2405FPW monitor do not seem to be working. I have tried everything I can with respect to resetting the monitor as it powers ...
Question about Dell UltraSharp Computers & Internet
seems this must happen to "warm up" the monitor in some way. Some threshhold is crossed and then the monitor can opperate perfectly normally. What's wrong and how do I fix? Thanks. Unscrew 4 screws on
Question about Dell UltraSharp Computers & Internet
...front" or "on top" of the regular desktop, so all windows and mouse activity passes behind it. The problem will often clear up after a while. Unplugging the monitor sometimes seems to fix it, but it ...
switch was also....difficult... but I think you get the point. So, it should look something like this. So, put the circuit back on, and test with the first two srews on.. you might need to readjust it
...front push type buttons can have this issue. Behind each "button" is a tiny micro switch--the outer button activates it and it is a MOMENTARY switch which means when the outer button is released it ...
Question about Dell UltraSharp Computers & Internet
.... Sometime a few seconds & sometime about 30 seconds in certain steps. Best Regards, Simon Tukina ([email protected]) Seems either aproblem with Invertor board or Front panel switches are leaky. ...
...and the power button does not light up either...any suggestions? Got the same problem. Remove the front ring around the screen, to check out the actual switches. Everything seemed normal, but ...
switch PCB assembly from the front panel, then you will see the plastic power push button that is attached to the front panel by a couple plastic stems that were melted on to hold the button in place
...switch it off is to unplug it. The on off button on the front does not work. While this means that the screen can still be used, it is a pain...Any ideas please? Welcome to fix ya Your monitor seems ...
...switch from DVI to VGA before monitor goes to to sleep? The "Select" button on the front is supposed to perform this function, usually a monitor will default to whatever mode it was in when it shut ...
67 questions posted
Usually answered in minutes!
101 Questions
94 Questions
96 Questions
77 Questions
74 Questions