Dell UltraSharp 1907FP 19" LCD Monitor "open case" Questions

Opening case of Dell 1907FP to resolve stuck power button I have a stuck power button also on my Dell 1907FP and need to remove the front case. Can you describe what you mean by pushing in on the tabs

...open the case. So now I want to share my experience on how to open it and also publish some helpfull pictures (of course these also works for the 2007 screen): 1. I made a tool from the top of a ...

open up the monitor case and check wether the button is broken. If the button is broken, you're going to have to improvise a new one, since new buttons aren't really being sold. If that isn't the case

vertical colored lines When i turn on the monitor, it is covered in vertcal lines. It still loads to the opening screen but the lines are covering the entire screen and are yellow. I can barely see ...

...from people who had the exact same fault and fixed it, so it may be quite a common problem with these monitors. search for "Repair of DELL 2405FPW" which also explains how to open the case! Good

...open the case, or else, I would see the opening marks on plastic. Hello DaneCooksy, This is most probably a problem with the connector that links the LCD pannel to the display's mainboard. A faulty ...

...open the monitor case. First, unscrew the four screws at the back. Then insert a putty knife into the small crack between the front bezel and the monitor shell. Carefully work you way around and ...

...open the bottom. Becareful to not damage the plastic. As bottom is opening pry around the entire frame it will come loose. Make sure you place the monitor on a table covered with a towel in the final ...

...OPEN THE CASE OFTHE DELL FLAT MONITOR HOW DO I OPEN THE CASE FOR THE DELL FLAT PANEL 1706FPVT tonylad, Remove the pedestal by taking out the 4 phillips screws on the back. The back plastic cover will ...

...from the table... now not working at all, meaning when I press the power button, nothing happens. I opened the case to access the power button directly from the circuit board and still nothing ...