...is not loud. I don't know if a speaker is blown or an amp isn't working. Please help me resolve this issue. I have a Sharp CD-XP5500 Check for any blown fuse on the board with the power
...blown fuses Stereo turns on plays but no sound speaker outputs or headphone Fuses blow when there's an overload. This is often caused by faulty speaker wiring. But the main problem you have will ...
...amp fuses were blown. I replaced the fuses, but they immediately blew again. I used higher capacity fuses (10 amp) to see how bad the problem was and those blew. Testing the problem a third time with ...
Question about Fisher Audio Players & Recorders
...amp EVER. I assume you have tried other sources. I assume the unit worked OK until the IC blew. I assume you replaced the IC yourself? Often, parts with the IC also fail. There maybe fuses that look ...
...amp, you must be able to see where the speakers plug in from the outside. Now trace back the path of the chajnnel and look if you can see blown or damaged capasitors(Cilyndrical objects). You should ...
blown or the power amp will need replacment ok los fusibles se queman porque hay algo en corto por lo regular son los amplificadores. pero si no sabes nada de electronica lo mejor es que lo lleves con
...amp to move it back to its original position, I heard a small pop and it shut down. If I try to turn it on now the display shows "mecha error", followed by "eject" then "standby", at which point it ...
...blown amplifier IC in the stereo that must be replaced, that is what causes the protect error on the display. It is a good idea to take it to a repair center and have them do it if you are willing to ...
Question about Sony Audio Players & Recorders
is a protection device. Sadly you have probably blown one of the main power output devices in the amp. If you know which channel the two wires that touched belong to, it will narrow which one has gone
...amp has blown. Is their anyway to fix this or would I have to buy a new amp for it. If so how much do they roughly cost. The system seems to work fine but through a film the sound just goes dead. Any ...
11 questions posted
Usually answered in minutes!
415 Questions
267 Questions
266 Questions
180 Questions
148 Questions