Galaxy Radios DX-99V 40-Channels Base CB Radio "frequency circuit board" Questions

...frequency. Two things. One does it just cycle 2, 3, or 4 frequencies and then continue to recycle those same frequencies despite going up or down in channels? If this is the case there is a board in ...

frequency displayed.when mic is press, error 3 comes on the screen. White Glue needs to be cleaned off the circuit board. Common issue with these radios. Check for swelled or leaky capacitors. A radio

...frequency counter starts jumping around cant hear people talking sometimes turning it off then on again will fix it for awhile and i think i,ve narrowed it down to a area on the circuit board behind ...

...circuit that creates the proper frequency or channel. It is then increased to about twice the power of the voice circuit. They are combined together just before it goes into the antenna.It leaves the ...

circuit board. Held onto the side of the radio by a screw and has two or three connectors leading to the board. Replace that little board and your radio will be good as new. I have seen radios come in

this radio for both the display and actual freq. error. 10.249 Mhz frequency can on left side of board by "TR24" going bad or loose. Check it out I've had a couple 99v's that's what it was. GOOD LUCK!

...frequency meter shows 10.695 or 00.000. Sometimes, a slap to the box willcorrect this, but sometimes not. The radio neither receives or transmits while in this condition. What is causing this? Hi, my ...

...frequency is slightly out, where is the adjuster in the cobra They are the small square metal cans with ferrite slugs inside, there are two larger coils at the rear of the circuit board filled with ...

...circuit board are very small, and manipulation requires special tools, anti-static precautions and specialized test equipment to adjust and verify correct operation. I believe that there is an issue ...

...frequency counter circuit, that causes a buzzing sound. As for the low modulation, there are too many things that could cause this. It really needs a tech, and your gonna end up paying to have it ...