Panasonic SC-AK640 Shelf System "sa power amp" Questions

...SA-AK640) it works for about 5 seconds. Then it turns off and gives the "F-61" error on the screen. F61 Power Amp IC output abnormal Upon power on, PCONT=HIGH, DCDET=L after checking LSI. For power. ...

...sa-ak25 an error code or something comes up on the screen display F61 it wont play anything..it comes on displayes the F61 and then shuts right back off. the problem is F61 is speaker protection mode ...

F61 ON SA-AK78 You may have the same problem as I had..broken solder joints on power amp board..namely the power relay.

f61 cd stereo system SA-AK640 F61 is an Error Code,more specifically a Fault in the Power Amp,the Stereo will need to be sent into Panasonic for Repairs.

...sa-ak770 will not come out of standby mode When i plug the power cord in the 'AC IN' light goes red but the on button will not turn the hifi on. Check to make sure there are no shorts ...

...sa-ak240 stereo system i get F61 on the display then it shuts down to standbye. F61 is an Error Code......it's basically indicating that something inside the stereo is malfunctioning or broken. the ...

...sa ak40 panasonic stereo every time i power on my stereo it is showing goodbye and closes down, it should say hello, i can not get into the tuner cd payer or the tape deck, it shows f61 and i would ...

...SA-AK-37 Music system The system plays normally but switches off suddenly with display showing 'F-61'. At times only one speaker plays. Do you have the manual, I think panasonic put some of there ...

...sa dv280 hard reset have the above system i have power but cannot get into the system when i press the power button it just clicks back off again showing the reset code f61 can u help? DESOLDER THE ...

...SA-VA10 Shelf System Powered Monitor Speakers. Constant Buzz .. around 1K . .sounds like power supply. Not attenuated by increase in amp volume. Help Secondly sounds like the power supply filter ...