Raytheon VHF 53 CB Radio "1" Questions

cb trc-447 After installing the antenna, follow these steps to adjust the standing wave ratio(SWR). 1. Turn on the CB. 2. Set S/RF/SWR/CAL to CAL. 3. Key the Mic and rotate SWR CAL so the meter points

...know the procedure? Hi there!! You need a PC-2 adapter that should have come with your PEAT-REPEAT-1 PP-1. If you already have the PC-2 adapter than you need to plug the mono jack with the 2 blue

I need the manual/s for a Cobra CB radio, 29LTD Classic,ser#105129711,manufactured 5/01. Thanks for any help you might have, This radio has a built in SWR meter and I need to know how to tune it or do

go back to late 80's the 4 pin design was a little different. Anything new it is simpler. Stock Mic 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive) Astatic - 4 wire 1- Shield

...your swr After installing the antenna, follow these steps to adjust the standing wave ratio(SWR). 1. Turn on the CB. 2. Set S/RF/SWR/CAL to CAL. 3. Key the Mic and rotate SWR CAL so the meter

I have a Cobra 21- 23 channel CB and the wires pulled out of the plug. The mike wire has red,yellow black,blue,whiteand a ground. My plug has only four prongs to solder to. What four colors do I use? ...

I installed a browning br-51 cb antenna on my cb radio. I have a radio shack swr/power meter in-line and no matter how short or long I adjust the whip I cannot get the swr reading below 2.5. The ...

...than a half inch is suggested. Normally the Cobra pin out is standard for most radios. Stock - 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive) Astatic - (4 wire) 1- ...

swr to low? hi i have a trc 48 std 5 watts on a clr 2--.5/8 wave..my swr is low.its lower than 1.5 .is this bad..... i can get out a good 30 to 40 miles with it... and also i can here short wave radio

transmitter to power that is reflected back from the antenna. Ideal theoretical ratio or "match" is 1:1. Real life is more like 1.1:1 (one point one to one). Most transmitters are perfectly happy with