Acer AL1916W 19" LCD Monitor "menu screen" Questions

Screen shakes BUT menu is clear (Not shaking). Screen shakes BUT menu is clear (Not shaking) and the power cord solution does not work. What other Ideas are there? Try installing this Monitor on a ...

...screen display) menu of you monitor by pressing menu button. Other monitor OSDs cannot be accessed on single button but some combination of buttons but considering it can be accessed, please look for ...

...screen again. Tried reset from the menu which also momentarily brings it up to full brightness, then it drops back to the low brightness screen yet again. It knows there's something wrong as it tries ...

screen off as soon as you tell Windows to shutdown. This is normally a glitch in the bios, or it can happen if you accidently press a combination of buttons on the front control panel. That is how the

...Screen Menu Problem My Acer monitor works fine on boot up and goes into auto setup mode but when the system is loaded the screen is black and the power light flashes rapidly. Just before it happend I ...

...to the left how do I center if There is a setting on the computer screen, it will say vertical and horizontal shift, There is buttons on the monitor to get to the menu to get to screen shift

...screen and would not go away even after pressing the auto or menu buttons on the monitor. When the menu option finally shows up, it seems to have a life on its own and will just run through the ...

...screen.And perhaps the boldness of my type brightness is controlled on the monitor in the menu, read your manual, boldness of type is controlled in windows in the View sub menu bar at the top of any ...

...screen and just goes from one to the other , power light flash on and off. select f8 to enter advance menu. on advance menu select last known good configuration. allow unit to boot. if this fails you ...

...screen menu. You can choose between "Warm", "Cool" and "User". Maybe you used the "Warm" setting before and somehow it got changed to "Cool". If this is not the case, you can try the "User" mode and ...