Maytag Atlantis MAV6260AWW Top Load Washer "not spin agitate" Questions

My Maytag Heavy duty 4 speed select, 10 cycle washing machine agitates while in spin cycle why? If your Maytag washing machine is agitating during the spin cycle, it could be due to a few different ...

...agitate/spin solenoid, but they are much more involved. if the washer won't spin, the lid switch, timer, drive belt, transmission, or agitate/spin solenoid could be the cause here as well. Sometimes ...

...agitate or spin,but some will operate on agitate with the lid open,but not on spin,open control panel and bypass the lid switch and this will tell you before you tear out the direct drive pump,motor ...

...Agitate or Spin - Home Repair ... ? 15:00 www.youtube.com/watch?v=wUSmUSWWIS4 Oct 20, 2013 - Uploaded by Robert DIY This washing machine would not agitate or spin. There is a ...My washer also is not ...

...agitate or spin, even with the lid closed. Missing: WSLP1100A0WW ?' Show results with: WSLP1100A0WW SOLVED: GE WSLP1100A0WW not agitating Fixya https://www.fixya.com > ... > Washing Machines > GE 17 ...

...AGITATE DURING WASH OR RINSE CYCLE BUT WILL SPIN DURING SPIN CYCLE. READ IN FORUM TO TAKE OFF AGITATOR & TRY TO SPIN DRIVE COLLAR BY HAND AND THAT IF IT WOULD SPIN FREELY THEN THE SPLINES WERE ...

...ras8445kq0 does fill and drain. will not spin or agitate. If the agitator does not spin at all, then it is your motor coupling. If the agitator tries to spin but cannot, then it is your dog

agitator free spins During the wash cycle the agitator free spins, which means the clothes only soak. If you push down aon the agitator, it begins to work properly, but free spins again when you ...

...agitate and not spin out. The pump is on opposite of motor so thats why it will pump out. The motor has different speeds and one may be bad that will allow it to agitate but not spin out. The ...

...agitate or spin. When to the spin cycle something clicks as if trying to spin but does not. Checked belt...fine. Did the reset motor troubleshoot...did not help. The rods are all fine and electrical ...