Maytag HAV3460AWW Top Load Washer "motor sliding tension" Questions

...is a sprung tensioner and the second is a slide tensioner. and Some have a slide bracket on the motor mount itself.. and I would bet this is the kind you have.. check the motor mount to see if ...

...slides on the mount smoothly. the typical tensioner should be able to be bent a little to tighten up the tension adjust the motor a little to put that little bit of extra tension on the

...glide easily. You need to go to Repairclinic.com and order a motor slide kit for you model and clean the complete motor slide assembly. With no motor tension the unit will not spin the belt will ...

...tension is applied by a spring. if the grease in the slide gets old and hard, the slide will stick making for a loose belt. To access, you'll need to remove part of the cabinet. Pop the top loose at ...

...motor slides one way to tension the belt on spin and the other way to tension the belts even tighter during the spin. If your motor carriage is rusty the entire carriage could be replaced and keep ...

...on the bottom when you remove the back panel. You might have to loosen the tensioner on the motor and slide it toward the drum, put the belt on and slide the motor back to pull the belt tight ...

...tension. There are 2 plates used to mount the motor. The motor gets bolted to the top plate and the 4 slides get install on the plate. The bottom plate has 2 tracks that the slides glide on them. The ...

...the timer with no effect. The lid switch works fine and the water drains. I have since pulled the motor to remove a stripped nut, and now it won't do anything at all. Please help. Sounds to me,

loose belt how to adjust turn off power lean machine over loosen motor bolts enough to allow motor to slide adjust tension while re tightening bolts hope this helps

...I replace the belt on my samsung J1045. The belt is frayed and the drum doesn't turn. Loossen the motor bolts ( do not remove fully ) Slide the motor assembly towards the larger pulley. Now replace ...