Maytag MAV6200 Top Load Washer "atlantis remove water inlet" Questions

...Remove the water supply hoses and check the small screens inside the inlet valve. Make sure they are clear of rust or debris. Next, check the solenoids. They can be tested using a multimeter or ...

water valve) has solenoids that get told when to open and for how long. If the solenoid is bad - it may not open all the way.... OR the inlet screen is clogged with sediment. The Last one is easiest -

...Atlantis 7700 AWW - no cold water wash or rinse Everything else works fine Look for a cold water supply problem, since cold water is what is used in the rinse. Check the water inlet valve. Remove the ...

...Remove the water supply hoses and check the small screens inside the inlet valve. Make sure they are clear of rust or debris. Next, check the solenoids. They can be tested using a multimeter or ...

...be a leaking check value of some type?? a faulty inlet water valve, the valveis not fullly closing causing water to trickle in, replacethe valve ( in the meantime turn off the water inbetween

...water inlet valve. There are screens to keep most of the sediment out of the valfe itself. These scteens are not made to be removed, and if you clean them, make sure you don't use anything sharp. If ...

water inlet valve has something caught between the diaphram & body or the diaphram is split. If it is the type with screws in it you can pull it to pieces, remove the foreign matter or replace the

water off and remove pipe off of the machine side. You will see the inlet to the water valve. Normally the small sieve in the oriface is blocked. You need to pull sieve out with long nosed pliers.once

Remove the hose from the machine and see ho the water flows through it. Look at the hose connection on the machine in case there is a filter screen there as well. The hose may also have been kinked or

...hoses. If you is using flood hoses toss em. Remove and clean the inlet screens on the water valve. Check valve for continuity and hit it with juice to see if the mechanics are functioning