Question about Computers & Internet
...power surge can cause the circuitry inside the LG-brand LCD TV to function erratically. 2 Unplug the video cable from the video connection on the back or side panel of the LG TV. If more than one ...
......
...You mean a powersupply cord?Power adapter? If yes have a look at this.. ...
...these go bad then the power isn't stable enough to run the video board. The video board also has the controls that connect to the front panel.. so bad power, no video, no controls. Hope that helps
Question about ViewSonic Computers & Internet
...power on but the video blinks on then off then blank screen That is a power supply problem not a video board problem. You will need to either rebuild or replace the power supply to fix that
Question about ViewSonic Computers & Internet
...power, and then take out the video card. Wait 5 minutes and then put the card back into the computer and turn it on. For onboard video; turn off the computer, unplug the power, then hold down the ...
Power/video problem I have a Gateway monitor (FDP1965) that is not powering on properly and/or staying powered on. Once the power cord is plugged in, regardless as to whether or not the video cable is
Question about ViewSonic Computers & Internet
...power, but no video signal received: Verify that the computer is turned on. You can test this by pressing the Num Lock key on your keyboard once or twice. If the Num Lock light does not turn on/off, ...
...It's a 19v 2.6a. Here is the eBay link for you: ...
power, then proceed to (2). 2. Is there video displayed on the screen? NO: If there is no video displayed, then proceed to (3). YES: If there is video displayed on the screen/monitor, then proceed to
99 questions posted
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions