Maytag Performa PAV2200 "low level water reset" Questions

Ad

...low level, or other, and it still just fills. Frustrated. Inside the case there is a water level switch. It is round, has 2 wires to a number of connectors and a tube that goes down to the drum. As ...

Ad

Question about Washing Machines

1 Answer

...level low Washer will only fill to 2/3 level when set to maximum. After it fills to the 2/3 level, the level reset button can be held to fill washer to the correct level. check pressure switch ...

Ad

Question about Kenmore Washing Machines

1 Answer

...washing machine top loading .is there a reset for the flot so u get back the noemal loading for the wather livel Turn the water level knob all the way past the low level (left). This should reset

Question about Maytag Washing Machines

1 Answer

showed "nd" on the display screen, and now the door will not unlock. What can I do? ND is NO drain The water level fails to drop below the Low Water level reset within 15 minutes, before a spin begins

...the water level: Make sure that the water level in the washing machine is correct and that the water supply line is connected correctly. If the water level is low, it may cause "Err 105"

Question about Kenmore Washing Machines

1 Answer

...level selector by turning to low and back up to desired Try hot and try cold. See if either one will fill/partial fill. Try rinse Try spin only. No rinse no spin Check timer electrical If spin but no ...

Question about Washing Machines

1 Answer

...level is always too low. It's almost like I have to do half loads or sit there holding the reset until it fills up all the way. Is there anyway to adjust that? It's a frigidaire fws933fs top load ...

low water flow, replace the hoses and check for any other places that could be clogged or leak. Make sure that the drain hose outlet isn't below the normal fill level in the washer. Check the pressure

Question about Frigidaire Washing Machines

1 Answer

...low then clean or replace the inlet valve, check the water level controller to stop inlet flow and start wash and finally the drain and refill for rinse spin. if not there is an error in the program ...

Question about Washing Machines

1 Answer

...will need to check the water level switch. With a model# I could give you more instruction on how to get to the switch. Have tried moving the level switch to high and low levels to see if it

Not finding what you are looking for?
Washing Machines Logo

655 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...