Panasonic NV-HS1000 S-VHS VCR "tape wont eject" Questions

tape wont eject small spring found tape wont eject small spring found Take off top of vcr to expose the tape carriage lift tape door, on the lhs/rhs you shouls see the other small spring fit the ...

...tape wont eject is either because, it is stuck or the tape run loose inside of it. To remove the tape, unplug the VCR, then unscrew it open, you will have direct access to the tape, so try to plug it ...

...wont stay on or more than a second and its flashing a number 3 and a tape symbol the tape eject mechanism is either in the wrong place,or there is a tape stuck inside.take off the cover,and make sure ...

Wont eject the tape. Found small plastic gear broken. Wont eject the tape. Found small plastic gear broken check the tip in my profile

...right position. The mode switch tells the electronics which position the mechanism is in, be it play, fast forward or eject etc. If the switch is faulty and stuck in eject then it wont except a

Tape wont play then ejects The vcr takes the tape in OK but it does not play and after several seconds the tape is ejected again. I am this problem... please download service manual *pdf... jedlicka.j

tape wont eject. is it a gear that needs to be replaced. what is the name of the part i would need to order to fix it It's not possible to say what needs replacing (if anything) without knowing why ...

Wont eject tape This often points to rubber drive rollers that have glazed surfaces. If possible, remove the housing and watch the mechanism while you try to eject the cartridge. You should be able to

WONT EJECT I TURN VCR ON IT STAYS ON FOR A FEW SECONDS THEN TURNS OFF....I HAD TO GET THE TAPE OUT AND IT STILL SHOWS THAT IT HAS A TAPE IN IT.... When the tape has been removed the carriage deck will