Maytag PAV2300 Top Load Washer "outside timer pins" Questions

Ad

Question about Whirlpool Washing Machines

2 Answers

...timer going though. Hello, Your problem is going to be the lid switch, Most whirlpools have a lid switch located on the right side about half way down under the lid. If you lift the lid up you will ...

Ad

Question about Frigidaire Washing Machines

1 Answer

timer, so replaced that (part #131800500). Motor then turned, but only counterclockwise and worse, sparked. One bushing was almost completely worn, so replaced motor (part # 131276200). No more sparks

Ad

Question about Kenmore Washing Machines

2 Answers

...timer to different areas (like drain) and see if it will work then. It really does sound like a lid switch problem. Hello, yes there is a couple of ways to be sure, the first is to access the control ...

Question about Maytag Washing Machines

1 Answer

...timer. If this hose develops a leak or a pin hole the washer can over fill as the WLC may not be able to shut the water off. The water level control can also break down and allow the washer to over ...

Question about Maytag Washing Machines

1 Answer

...timer. If this hose develops a leak or a pin hole the washer can over fill as the WLC may not be able to shut the water off. The water level control can also break down and allow the washer to over ...

Question about Whirlpool Washing Machines

7 Answers

...timer. If this hose develops a leak or a pin hole the washer can over fill as the WLC may not be able to shut the water off. The water level control can also break down and allow the washer to over ...

...timer. If this hose develops a leak or a pin hole the washer can over fill as the WLC may not be able to shut the water off. The water level control can also break down and allow the washer to over ...

...timer to start the washing machine running once the correct water level has been reached. Meter check ur water pressure switch? You can test it with a meter and with a manual test? ( first locate it ...

Question about Whirlpool Washing Machines

2 Answers

outside pins not the middle this is a ground) You should find you have no condinuity and should replace this switch. If you have any other questions or concerns please feel free to comment again. Good

...timer to start the washing machine running once the correct water level has been reached. Meter check ur water pressure switch? You can test it with a meter and with a manual test? ( first locate it ...

Not finding what you are looking for?
Maytag PAV2300 Top Load Washer Logo

855 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...