...loud noise during spin cycle. Sounds like a metal bolt, nuts, etc. banging against the drum. drum bearings are gone,it would cost too much to repair,the drum shaft would to be repalced as ...
drum bearings. Possibly a broken damper. .. Loud noises during the spin cycle in a Miele W1213 could be due to various issues such as unbalanced load, worn-out drum bearings, or a malfunctioning pump.
...loud noise like the motor was straning and the tub would not spin anymore. Check and see if the inner drum is loose and floppy.if it is, it's likely the bearings have collapsed, and require ...
...loud noise during spin cycle Hi, The inner bearing will be faulty kindly replace the inner bearings as well as water seal before that kindly check whether the drum is freely moving with out any ...
loud. During the spin cycle the drum moves at a higher RPM and so the counter weight of the clothes within can make the drum rotate eccentric or out of sync. So check if the belt is loose on the motor
...drum bearing is starting to go. The first symptom is a loud high pitched noise during the spin part of the cycle. As problem gets worsening you will notice that the drum will be a bit wobbly if you ...
Question about Kenmore Washing Machines
...Makes a loud noise when on spin cycle and is not balanced. It could be a drum spring has broken or stretched too far, there is too much of a heavy load in the drum, or the bearing needs
Question about Maytag Washing Machines
...drum spins. It is so loud that we can not finish the cycle. It does not sound good. I have taken off the access panel in back and do not see anything. It sounds like the sound is coming from inside ...
Loud clanking noise during spin cycle. Will not spin during the whole final spin cycle and clothes are wet. If it is a front loader, then remove the rear panel, remove the belt, and soin drum by hand,
...loud noises. If the drum itself is split or the 'spider' is corroded, broken or has come apart from the back of the drum it will create a loud noise on every turn of the drum. (When the bearings have ...
855 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
658 Questions
476 Questions