Maytag PAV2300 Top Load Washer "drain smells shower" Questions

shower drain is open and i can smell the water when my washer drains too. White vinegar helps. Or if you have a septic tank your drain field may be clogged up and backing up into your pipes where they

...drain, and that works until you use the shower again. The toilet in that bath bubbles when our washer drains. Are these connected? Before we cut down walls to get to the pipes, what should we do? ...

drain it into a nearby sink or shower stall or rubber barrel just to make sure you aren't getting any backstreaming dirty water. Let me know how it works out or what you find and if my suggestions don

...shower or bathing. The manufacture manual advises not to use bleach on this tub when cleaning. First of all, after each use, refill the tub with warm water and run the jets for about 10 minutes to ...

drain had no odor. When I clean under and in between the rubber seal on the door there is no sign of mildew or the odor on the towel that I use. I stick my head inside the washer and it's obvious that

smells most of the time, and we can only use our towels after two or so showers. By the way, we live in dry Colorado. I finally decided I do not want smelly towels (or house) for the next 10 years, so

...smells. When the water runs down the drain, the air behind it has to be replaced, if its not, the pipes will try to **** it from some drain...typically the shower drain, but sometimes the floor drain ...

...shower when it was going through its cycle something must be blocking the drain. I need to know how to get the top off and have wanted to anyway because I think this may have been a problem because ...

...drain ,water smells ,leaking codes are wont drain ,water smells ,leaking codes are LF,OB & LD The first thing to do is to CHECK IN AND AROUND THE RUBBER DOOR BOOT (called a bellow) for small ...

...drain through the water hose to outside. See if the water has a smell / any "floaties" that may indicate a mold / mildew growing inside the agitator. You can try to over fill (fill to highest level, ...