Maytag Atlantis MAV6000 Top Load Washer "dont work normal setting" Questions

dont disolve all the cleaning powder or what ever you use. try it on its hottest settings and touch it to see if its hot if it is then try another normal wash after and see if that has improved things

...work, plug off the wall, open up behind the machine, check to see if all connections are tightly secured. This is possible (loose) due to vibrations in the machine over time. Specially the connectors ...

...dont need to set the program every time i want to do the washing cause there is already program set, i just put clothes inside, close the door and press start. I restated washing machine few times, ...

...the pump now you will have to put one tsp of oil in where you put powders at and run cycle on normal and then see what you get. if this dont work let me know and we will go from their. thanks, ...

...dont see any melted plastic inside the cabinet, this could be a transformer going bad, they have a funny smell when they burn out and its only used during the microwave cycle, these are pretty ...

...normal cycle setting, and noticed a few things. 1) If it indicates it will take 45 minutes, it doesnt, it jumps from 45 min to 15 min. I think the time jump, is due to the fact that it is skipping ...

...dont its the timer. if the motor is running, you probably need a clutch. also before you get too far check the lid switch. even of it looks good sometimes they split and appear to work normal. easy ...

dont ! The washing machine has a level switch which activates when the water level creates a certain pressure in a tube leading to the switch. The machine should just sit there until it gets the water

dont think its to do with water. Would it be the motherboard or what. thanks I would like to know if there's water coming into the machine on a normal wash then I can give you an answer to the problem

...dont hear the motor or any other noise. I opened the lid and put a screwdriver to press the switch to see if it will spin nothing happened. Any ideas? Is it normal when you open the lid the washer ...