Maytag Atlantis MAV6000 Top Load Washer "brake assembly" Questions

Ad

brake and drive tube assembly Have a Kenmore/Whirlpool Ultra Heavy Duty 80 Series that seized and burned up the clutch. I am trying to remove the brake and drive tube assembly and did as instructed by

Ad

Question about Maytag Washing Machines

1 Answer

...brake assembly. The snubber ring assembly is a white teflon ring that sits under the wash tub at the base (called the milk stool, because it looks like an upside down milk stool). The entire wash tub ...

Ad

...brake assembly to see if it is tied up. If you see any black dust or particles, I would replace the brake pads and the clutch assembly. Here are the brake pads to order.Here is the clutch ...

Question about Washing Machines

2 Answers

brake assembly. You'll need to remove it in order to check the fault location. Removing the Brake Assembly/Nutate Shaft--- 1. Remove the spin basket. 2. Remove the drive belt from the large pulley. 3.

Question about Kenmore Washing Machines

1 Answer

...Brake assembly. 2. Gearcase (transmission) starting to go bad. 3. Basket Drive assembly worn or loose. The more common problem is a worn clutch assembly, but you can't always be sure. If the gearcase ...

Question about Kenmore Washing Machines

1 Answer

...brake assembly. http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=137&osCsid=2b032a4fc7eb55782e68a26559e72e0a In order to get the agitators out, you need to ...

Question about Maytag Washing Machines

1 Answer

...brake assembly or the transmission assembly going bad and needs replacement. If the sound is loud then the recommended repair is replacing the transmission assembly however you can also check the ...

Question about Washing Machines

2 Answers

brake assembly on your Maytag top loader WITHOUT the use of special tools. This is not that difficult of a repair either. To replace the snubber and/or brake assembly follow these steps: 1. Remove the

Question about Maytag Washing Machines

1 Answer

brake assembly or transmission drive pully has went bad. Problem is, that brake assembly must be done by a qualified repair-person because it is strong spring loaded and will cause major injury if you

Question about Maytag Washing Machines

1 Answer

...brake assembly. I would suspect that the brake assembly is the cause of the noise as this engaged when you the washer agitates. If it was the bearing it would make a loud noise in the spin cycle,

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

1,252 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

603 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...