Maytag Atlantis MAV6000 Top Load Washer "bad flow meter" Questions

Ad

Question about Maytag Washing Machines

1 Answer

flow meter bad ..remove the three screws along back edge of top slide top back and off on left side there is a small round device with hoses into and out of it and 2 wires attached ..this a flow meter

Ad

Question about Maytag Washing Machines

1 Answer

...bad flow meter, sensor, wiring harness is loose or a bad CCU Central Control Unit. At the RINSE cycle if water enters the machine you must time the water fill for 8 minutes or less. If water does not ...

Ad

Question about Kenmore Washing Machines

1 Answer

...bad water valve, flow meter or pressure switch. One key to determining the cause of the FH error is how fast the error comes up in a cycle. If the error appears within 1 or 2 minutes then the most ...

Question about Maytag Washing Machines

1 Answer

The machine must take on 10 and 1/2 gallons of water in 8 minutes or less when filling. If not it could be low water pressure,bad water fill valve,bad water flow meter or bad CCU(central control unit)

Question about Maytag Washing Machines

1 Answer

flow meter in the washer that could cause this part number WPW10110225 if you go here you can see it https://www.repairclinic.com/PartDetail/Flowmeter/WPW10110225/1381535 also check the screens on the

Question about Washing Machines

1 Answer

...flow meter located under top cover on left side small round object with 2 small hoses and blue wires attached it is supposed to let computer bd water is flowing into machine ..try tapping it with ...

Question about Maytag Washing Machines

1 Answer

...cycles, on all selections. Cheched hoses and strainers. probably fill valve ..one of the coils that controls flow to various dispensers may be bad an ohm meter for continuity ckd would be ...

Question about Maytag Washing Machines

1 Answer

...error message. What does this mean? F20 No water detected entering machine Could be a couple things . Clogged inlet screens on the water valve, flow meter gone bad. Pressure tube has sediment in

Question about Washing Machines

1 Answer

...is showing F20 across the screen and my manual does not show anything. F20 No water detected entering machine, bad flow meter leaf switch, clogged water valve inlet screens,pressure switch hose ...

...up and splits. Dispenser motor and flow meter have been replaced. What does the water pressure measure? Typically it's 50PSI +-10, I expect your pressure is significantly higher, or hose is

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

1,252 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...