Question about Alessi Kitchen Appliances - Others
...kettle and the handle fell off. i would like to know how to re-attach the handle. thanks, melita If it do not have any obvious way to fix it (locking clips or screws) and it was just inserted on the ...
Question about Bosch Kitchen Appliances - Others
...metal cleaner. Fill the kettle jug up to the maximum fill line and put the boiler on the maximum setting... boiling water. If the water doesn't boil... you have a more serious problem. Buy a new ...
Question about Breville Kitchen Appliances - Others
...working, kettle will not heat water The switch has stopped working on my Breville SK500-XL Kettle, so that it will no longer heat water. This has been an intermittent problem for a few weeks and now ...
Question about Chef's Choice Kitchen Appliances - Others
...kettle user, so I'm wondering what could be wrong. I've checked all the various metal connections and they all seem to be in the proper position. Nothing bent or corroded. Again this is like NEW! The ...
...kettle over and check the resistance between the center pin underneath and the ring of metal around it. It should be infinite when the switch is off, and about 12 ohms when the switch is held on. You ...
Question about Braun Kitchen Appliances - Others
...metal pins that hold the main part of the handle to the kettle. They have a little ridge around the top that you can use to pry them out with your fingernail. Once those pins are removed, the handle ...
...the lid being open and also for when it is not mounted on the base. The kettle also has three bi-metallic temperature switches. One shuts off the kettle after it has boiled long enough. The other ...
Question about Cuisinart Kitchen Appliances - Others
...metal tabs that stick out in opposite directions from the center. When the switch is pushed down, you can see these two tabs move. They are each moving to touch a contact and complete the electrical ...
...kettle, but today it stopped working. The power light at the base is operating and on. However, it will not get hot, not even warm. Is it a blown fuse somewhere? Have had same problem several times. ...
17 questions posted
Usually answered in minutes!
29 Questions
4 Questions
10 Questions